Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

Friday, February 24, 2012

Paper Mache Class

If anyone's been interested in learning to do paper mache but really didn't know how or where to start, PM artist Jonni Good of Ultimate Paper Mache will be offering a free online class on her website of the same name, ultimatepapermache.com.

Jonni's website has recently become one of my favorite places to hang out, primarily because she's constantly active making new projects all the time and posting tutorials on how she does them.

As anyone who's read my blog or seen my vlog knows, paper mache (and Monster Mud) is one of my favorite mediums to work in. Paper mache will typically form the base of whatever project it is I'm working on, even if it ends up not being the main one at the end.

I'm also always looking for new techniques and methods to use and recently hit on Jonni's paper clay recipe. That is now a new fave of mine too. While it's similar to some other paper clays I've seen on the Internet (it's a toilet paper based clay), she's added her own not-so-secret sauce to the mix and has created a very smooth clay that's very easy to work with.

That's important to know because it will also serve as the foundation of the online instruction she'll be leading.

We'll be building a cat as our project, and while I wasn't initially enthused about the subject (I'm noit much of a cat person), there is a certain connection between cats (black ones, anyway) and Halloween. So I'm pretty sure I'll have an arched-back cat as my inspiration for the class.

If anyone would like to join in, it's only necessary to keep an eye on Jonni's site for the classes as they're posted. No need for registration. No sign up. No cost.

I'll also plug her two books (I think she's published at least three) that have to do with paper mache: Make Animal Sculptures with Paper Mache Clay and How to Make Masks!

I purchased the first one as a Kindle edition and plan on buying the second soon as well. The Animal Sculptures book provides clear instructions and pictures for each step of the process and while the book is geared towards making animal sculptures (hence the book's name) it's easily extrapolated to any paper mache project. I'm currently using it to sculpt a prop head that I'll be using in my yard this year (I think he'll be The Cellarer, the monastery's commissary, who'll be carrying a monster-in-a-box prop) as well as using the paper clay to sculpt a large (3-foot) snake or dragon head.

I've already used the clay to make a skeleton's hand and lower arm for my Grave Escape prop (well, the radius and ulna are drying in the over right now).

The techniques and tools Jonni teaches are really useful for haunters and I recommend that anyone that wants to learn how to do paper mache as well as how to make their own paper clay (it's cheap and easy!) should head over to Ultimate Paper Mache right away. I hope to see you there!

image source


Lesson Plans & Videos:

Tuesday, May 24, 2011

Pillar Update

Did a little more work on my cemetery pillars the past couple of days. I finished carving the stonework into the foam on all four sides and then painted it with a coat of Drylok. I opted not to use any Monster Mud because I didn't want to cover up any of the detail, and in the end it really wasn't necessary.

(What's interesting is how the blue ink from the foam mixed with the Drylok, yet in that one spot where there's an "S" it didn't. Nor was that visible before I started painting. Ooooooh! Spooky!)

After that coat dried I painted it all over with a coat of black paint. The goal will be to build up the paint layers in successively lighter colors with the end result that it looks like stone. We'll see.

Painting melted foam isn't as easy as you might think. Getting the brush into all the nooks and crannies that are formed is a time-sapping, laborious process. My neighbor was leaning out her window watching me and offering commentary on my work (Yes! That's what I need!) when she asked, "Wouldn't it be faster to spray paint it?" I  explained about the melting properties of spray paint on foam so that I'd still have to provide some sort of primer coat on it. Plus, spray paint can get expensive, though the basic flat black cans at Home Depot and Lowe's are cheap at just $0.99.

As I sat there jabbing my brush into the crevices, I suddenly wanted to smack myself upside the head. I have a compressor with a sprayer attachment! So I went hooked everything up, and in 5 minutes time had the entire pillar painted. What had taken me three times as long to do just half of one face of the pillar took me a third of the time to complete the rest of it.

Don't know why I drew a blank on the spray unit before, but I guess my neighbor's colloquy really was what I needed after all.

Wednesday, May 18, 2011

Handheld Foam Cutter Tutorial

The latest addition to my hot wire foam cutting tools is a handheld device for when I want to do close-up work and don't need the table. Detailing the edges of tombstones, for example, or carving out pieces of foam that might be too awkward for the table to handle are the instances where a handheld foam cutter would be handy.

While initially basing my handheld cutter on a device hpropman made, this one is much smaller than his as I envisioned using it for the times I mentioned above. His cutter was about a foot or more in width; mine is about 6 to 8 inches.



To make the cutter, I used scrap 1/2" Schedule 40 PVC though I imagine other sizes would work, as would thinner Schedule 20 PVC. The parts list for my device are as follows:

Handle - (1) @ 8"
Cross bars - (2) @ 2"
Arms - (2) @ 4"
T - (1)
90 degree Elbow - (2)
End Caps (3)
Nickel wound wire 18 gauge
Screws (2) @ 1"
Nuts (6)
Washers (4)
Wire Connectors*
Wire

* I'm not sure exactly what they're called. They're circular and allow you to insert a wire into the end which you're then able to fit over a screw.

After cutting all the pieces to length, I dry fit them together. Actually, I didn't glue up any of the parts because I figured there may come a time when I want to swap out the parts for wide or longer pieces, depending upon what I'm working on, and rather than building a whole new cutter, I could just remove whatever's in there currently and replace it with the new parts. The caps definitely shouldn't be glued because you may need to gain access to the nut holding the screw in place.

This is a really quick project, the hardest part being fitting my fingers in the end caps to tighten down the bolt. Here is a picture of the end cap assembly showing the screw, two nuts, wire connector, and washer. As you can see, I drilled a 3/8" hole in the top and side of each end cap. The top hole is obviously for the screw; the side hole allows the wire to travel down inside the PVC.


I wrapped the 18 gauge nickel guitar wire below the top nut and tightened the nuts down. I stretched the wire across to the other side and did the same thing. Since I couldn't show a picture of the completed end cap assembly underneath that would have any meaning, below is a drawing of how the assembly looks.


One adjustment I may look at making is coming up with a way to fine tune the tension on the wire because when it heats up it does stretch a little. But in the meantime it works just fine. I also noticed I didn't need nearly as much power with this device as I did with the table. Or rather, I noticed the wire actually turned orange on the handheld at the same setting it was on for the table. Perhaps it has to do with the shorter distance between the wire, or maybe it's that I'm using 14/2 Romex wire compared to the 16 gauge wire I used for the table that I had left over from my LED spotlight project. Either way, I dialed it back before I snapped the guitar string.

With the hot wire handheld cutter and foam cutting table, I think I should be able to tackle any of the foam cutting projects I have in mind. I do have a tendency to build jigs and tools to help build projects without building any project itself! At least now I don't have an excuse for not working on props.

Sunday, May 15, 2011

Foam Cutter Power Supply Tutorial

After completing my foam cutting table yesterday, but failing at hooking up the power supply to it, I wanted to get it done to cut some foam.

The Garage of Evil tutorial calls for using a Pony PET-120-12-60 power supply, but no store around here had one in stock. I was going to buy one online, but did a little online searching and found, first, that these are called transformers (I didn't know that ahead of time, and when I tried to explain it to people they had no idea what I was talking about).

Once I knew what I was looking for, I went to Radio Shack and was able to find what I needed: I got a 12.6 VAC, 3 amp power transformer (it was Radio Shack part number 273-1511B).



I also bought a basic dimmer switch from Lowe's:


While the GoE plans also calls for a switch-outlet combination, I didn't figure that was going to be necessary. While I'll get a project box for the parts, the double gang box I originally bought won't fit the RS transformer. I guess that's one of the benefits of the Pony model, it's more compact than this one. But I wanted to cut foam now, so I went with what I had available.

I also bought alligator clips which I connected to 16 gauge wire I had available from my LED light projects.

It was then time to hook up the transformer and dimmer to the plug wire I salvaged from the train transformer. The GoE directions were essential since there are a heckuva lot of wires and no real rhyme or reason to them. Following the schematic, I hooked up all the wires, though I had two yellow wires coming out of the transformer instead of blue. 

Also there were no white wires on any of my components, everything was black or yellow so it was a bit of a guess as to which went where. Maybe it doesn't matter so much. Either that or I guess right. Obviously I bypassed the switch/outlet part.



I connected the transformer to the alligator clips, which in turn were connected to the guitar wire.


Here is a look under the table showing the other connection at the PVC arch:


I plugged in the setup and with fingers crossed I turned on the dimmer. There were no sparks and the circuit wasn't blown so it seemed to be working. A quick touch of the wire showed it was hot, so I shoved some foam into it and success!


I definitely didn't bring anything new to the discussion here, and I suggest anyone looking to build this power supply themselves to follow the Garage of Evil tutorial. It was a big help.

One note of caution: I wanted to see how high I could crank the power on the dimmer and put it all the way up. It didn't take long for the wire to turn red hot and then pop! About half the way provided sufficient power and I sacrificed the wire just to see what would happen.
Related Posts with Thumbnails
 
/* Use this with templates/template-twocol.html */