Showing posts with label Projects. Show all posts
Showing posts with label Projects. Show all posts

Monday, January 23, 2012

Silicone Implants

Comedy, Tragedy
Since my meeting with Secaucus was cancelled the other day due to snow, I decided to work on some small Halloween projects (after shoveling, of course).

I had read on the Hauntforum discussion boards a post about making silicone molds to cast paper clay items in. The process was lifted from Instructables, a website that contains some interesting Halloween-related projects (and a lot of dreck too).

The mold ingredients
The idea is to take regular silicone caulk -- the cheapest stuff you can find (but its gotta be silicone) -- and mix it with corn starch. The reaction between the two creates a cheap, quick mold that can conform to any surface. On Hauntforum, Jaybo used it to make an impression of a small resin skull and then used paper clay to churn out a bunch of skulls (he got the molding technique from MacabreRob who found it on Instructables with the resulting mixture called "Oogoo").

The rubber masks
On YouTube, ramathltol did a similar thing but used the plaster plate mold process. While others have used the plaster process, most notably Allen H from StiltBeastStudios, ramathltol ended up making hundreds of the paper clay skulls in what must have been a truly mind numbing process.

In his original post, MacabreRob discusses how mixing the caulk with corn starch is a little difficult because of the stickiness of the caulk, but after awhile it yields up and depending on how much corn starch you use you'll have between a few minutes and hours to work with the mixture. At a 1:1 ratio of caulk to corn starch, it you just a few minutes; at 5:1, you have 2 hours.

Pressing mask into Oogoo
I recalled, though, Allen showing how to making a silicone mold for a mask he was making, and he had mixed the caulk with naphtha -- about 50-50 he said -- which broke down the caulk and made it possible to paint on with a brush. I figured I would combine the two processes and see how that turned out.

So I squeezed out about half a regular size tube of silicone into a plastic container and eyeballed about a quarter of the amount of naphtha. I put the lid on the container and shook it vigorous back and forth and it obtained a much more liquid consistency. I mixed it with a bit of corn starch (I figure it was about one quarter the amount of caulk) and using a popsicle stick mixed it all together until smooth and flattened the surface.

The resulting mold
What I wanted to mold was a rubbery set of zombie heads I had found at the dollar store. The container was big enough for two of the small heads so I pressed two of them into the Oogoo and let it set for about 15 minutes or so (maybe a little longer, I was futzing around and wasn't really keeping track). The skulls, though, readily pulled out of the mold without any residue whatsoever.

I had intended to use paper clay, but really didn't feel like mixing up a batch, so I used plaster instead. I mixed up a batch and poured it into the mold, which had only been setting for about a half hour total. I left them in there for an hour or so and pulled one out and found the plaster was still wet. Maybe because of the silicone it stays wet longer than otherwise. While it gave the face an interesting texture, I decided to let the other head cure overnight.

The mold pops out easily
I'm not sure if it was because of having it sit in the silicone so it absorbs some of the chemical or what, but several days later now and I still find the casts slightly damp to the touch. I also notice the faces have some very small bubbles that are very brittle and easily brush away. So I'm thinking there is some absorption going on here.

Since I didn't take photos of the process, I did it tonight and noticed the plastic packaging of the rubber skulls has their reverse image molded into the plastic. So I just poured another casting of the faces, but this time using the packaging. I want to see if they cure faster than the silicone mold ones did. I'll report back my findings.

Plaster casting
Regardless, it was a fun little project that should enable me to churn out hundreds of small finials for my graveyard fence I plan to make. I think I'll make those out of paper clay (not sure how well plaster will hold up to the elements over the long haul, even sealed and painted).

The other mini project I did was used Great Stuff expanding foam to make a brain. I saw Steve from Steve's Haunted Yard (Yardhaunter5 on YouTube) do this and it seemed like a quick and easy project. And it was! Using a plastic Jell-O brain mold, I filled it about half way up and let it set over night.

Unfortunately, the results were disastrous. Although the outer portion dried to a hard shell like Great Stuff does, the inner portion -- the part that would have the brain design on it -- didn't dry, even after 24 hrs. When I pried the "brain" out of the mold. it split in two revealing a still damp interior. Now here it is two days later and the part that I left in the brain mold is still damp in parts, though mostly cured. I'll have to go back and review Steve's project to see what I did wrong.

With a Make & Take group meeting yesterday (Talking Boris Skull hack) and another scheduled for next Saturday (Coffin Creep, but we'll be working on the lid mechanism) it's great to be back in the swing of things building props!

Saturday, May 21, 2011

Brick by Brick

Between building my cemetery pillars and remodeling my basement, space has become a premium in my garage. I got 14 sheets of 5/8" sheetrock for free from a Yahoo! group called Freecycle and they're stacked to one side of the single-car space while my columns take up the middle. While I'm slowly making my way through the sheetrock, I figured if I'm really ever going to open up any room in the garage I'm going to have to get these columns done and put into storage.

So after lots of procrastination I began work on them again. The one column had the rigid foam insulation already applied while the other is still just the frame. Since I don't have space just yet to go get and store more insulation to skin the second one, I figured I'd do the design work on the first and at least get it out of the way.

Of course, working without any clear idea in mind as to the exact effect I want is difficult, but I decided that rather than brick it would have something of a stacked stone look. After laying out how big I wanted the courses to be, I measured and scored them, then began the laborious process of using a wood burning tool to make the mortar lines.

While that was actually quick enough, I didn't want neat, sharp lines since these are supposed to be aged pillars. So after making the outlines of the stones I wanted using a straight edge (the stones would have been straight and orderly when initially set), I went back and began "aged" them by rounding off corners and generally "unsmoothing" the neatness. That was the time consuming process.

Once that was done, I used a technique I had seen on a vlog by Steve's Haunted Yard where you spray water onto the foam and then hit it using a heat gun. It gives the foam a stone look almost instantly. Very cool! (I looked for but couldn't find the link to the exact video. Sorry.)

I only finished two sides of the column and will complete the other two today (hopefully). The second side took a little bit longer than the first because it was the side I have my access panel on and I wanted to disguise its presence so there are a number of smaller and misshapen stones there. While I think it hides it fairly well for the most part, it took a lot more time to do all those extra stones. But it also underscores why I built my foam-cutting tools: the score-with-a-razor technique left a lot to be desired. I'm confident my second column will come out much better using my hot wire cutters.

And while I probably don't have to coat them in Monster Mud before painting, I probably will anyway to cover up as many imperfections as possible. Then adding a bit of Drylok on top of that will give an additional layer of protection and stone-like appearance.

On a side note, it was actually odd using Drylok on a non-haunt-related project. While I don't have a problem of water leaks in my basement, since I'm putting up new walls on the exterior concrete block, I figured it was a bit of preventive maintenance to cover them in Drylok to inhibit any moisture that might want to work its way in after I put them up. Now that that's done, I'll be able to finish another corner of the laundry room. But that means it's almost time then to renovate the back stairwell which entails tearing down my old stairs and building new ones.

How the heck can I make Halloween props when my wife insists on me finishing the basement? That's the difference between doing the work yourself and hiring a contractor to come in. They'll be in and out quickly while I have the luxury of squeezing it in around skinning my cemetery pillars. I'm thinking though I may have to focus on getting the stairwell done quickly though. I might want clean clothes occasionally and I don't want to have to tell my wife, "Careful going to the basement, honey. That first step's a doozy!"

Monday, January 17, 2011

Let's Get It On

I haven't been doing much of anything Halloween related lately. While I had started building a new prop right after I put my 2010 display away, the approach of Thanksgiving, then Christmas, then all the freakin' snow chilled my drive, and my new groundbreaker has been sitting on my workbench waiting for me to return.

But I'm getting in the mood again (cue some Marvin Gaye music). While not haunt related, this weekend I built a toy box for a cousin's upcoming baby shower next month and I've got two more I still have to do. They all have spring hinges to prevent the lids from slamming down on little fingers, and all the edges have been rounded over to minimize the chance for cuts, scrapes, and bruises. "O" is for Olivia while the reverse side has a butterfly. The other two will have the letter "B" for her last name and a "1," respectively, to represent this is her first child.

And at the end of the month the NJ/PA Make & Take group will be meeting where a secret Santa gift exchange will take place. I have a special item in mind I want to build and will tackle that beginning tomorrow (can't tell you what it is just yet).

The toy box got me out of my lethargy, though, and I'm hoping the project I'll be working on next for the M&T will get me going again for Halloween. Now where did I put my glue gun?

Sunday, September 12, 2010

Under Pressure

I've worked on a few projects I have going on simultaneously, though nothing's really come to completion. My Wall Crawler got his "blackwash" yesterday and while it does mute the bright color of his "Nehru" jacket, there are areas of blotchiness I wasn't completely happy with. Overall, however, I think he looks much better. I also blackwashed the face and I'm happier with that too as a result.

My phallic symbols
I had picked up a pair of wooden columns that someone was preparing to throw away and figured they would look good as either part of another display prop or just on their own, lending an air of neglect and decay. They each sported a wooden hub at the top over which a capital could have been placed. I cut that off, and since they're hollow, cut out a circular plug that fit in the space. Glued and caulked in place, I painted it in two coats of Dry-Lok to both give it a stone appearance and protect it from further decay in the elements. I may (or may not) attempt "veining" the exterior to give it a marble appearance. It will depend on if I have enough time.

Christmas Dogs?
Earlier this year I picked up two motorized Christmas reindeer to convert into rabid dogs. Actually I just wanted one moving one; the other I planned to keep static as I figured I'd harvest the motor for another prop. However, while building my Flying Crank Ghost I ordered five "reindeer-type" motors so I don't need that one anymore. Now I'll have two dogs that I'd like to have growl and move their heads when trick-or-treaters approach.

Only I think I'll probably only get to one of the dogs this year. I paper mached the head assembly on one to see if it would tax the motor too much and there doesn't seem to be a problem as yet, though long-term I can't say. It certainly doesn't sound like it's bogging down and the head movement actually seems smoother with the added weight. I gave it three coats of mache and am debating whether to use paint or a faux fur I acquired. There should be plenty of fur for one dog and just draping the entire piece of fabric of the head of the prop while it was running didn't seem to interfere with the motor either. Again, I don't want to put too much strain on the gear motor. I am leaning in favor of the fur though, but next year may just paint the other dog. Since the rest of the body is static on the prop, I'm not too worried about weight and think that if it's heavier than normal it will actually be better as it will stabilize it and help it stand.

I'd also like to add two yellow or red LED eyes to the prop when it's activated. Typcially I'm not big on red eyes as they're not natural. Of course, we're talking about a Halloween display, but I think red eyes have been overdone by Hollywood so I'm leaning towards yellow. We'll see what LEDs I have left though. Right now, looking at that picture, it looks like a coelacanth raised from the ocean depths. I trust that with perky ears, a slobbering jaw, and a longer tail it will actually look like a dog when completed.

Getting some more head
Watching a movie the other night one of the throw-away characters had her lips sewn shut with big ugly sutures. My wife though that would be a cool look for a prop so I fashioned another paper mache head, though again, finding the time to complete it will be a challenge.

An eye for an eye
One last prop I'll probably start (and complete!) will be a moving eyeball for my front window. I saw this last year on Dave Lowe's blog Dave Lowe Design. It's an optical illusion using the concave nature of a bowl to give the appearance that an eye is following you as you walk by. He has a video of the effect on his site:



Look like a quick and easy project to do and will satisfy my wife who wanted me to make one last year. With less than 50 days to go -- and a Halloween party to plan and decorate for -- I'm limited in the number of new projects I can take on. Pleasing my better half is always a wise choice, however!

Sunday, August 29, 2010

Lazy Before Halloween?

Well, too lazy to post anything. There have been a few things I've wanted to post, but finding the time to sit down and actually write them up has been a losing battle this week (funny when you consider I spend a good eight hours or so a day -- virtually every day -- on the computer).

However, I have been keeping myself occupied building a Monster Mud wall crawler prop. The form's been made, the paper mache hands and head attached, and now I just need to cover him in Mud. I still want to build at least one or two ground breakers yet as well as another hanging corpse. I also have plans to build another Monster Mud creation, an evil fellow who will be sitting on a parapet overlooking the door where the ToTs will come, but that depends on my time management skills.

Home improvements (building a closet in an attic with a (obviously) sloping roof was a fun challenge, particularly considering the heat captured there), diverted a lot of my time, as well as moving my daughter into her college dorm.

However, I did manage to compile my latest list of great posts by my fellow Halloween bloggers which I've posted on the Fire & Brimstone page. Maybe a day late (okay, two days!), and the picture up there is one of the props being built. Looks like it's going to be a great haunt greeter!

Now that we're entering crunch time -- is there really just 62 days to go?! -- I'll need to focus my own efforts a lot more on what I want to accomplish. So much to do so little time. There's never really an end though when you want to improve and update your haunt on a regular basis.

Thursday, August 5, 2010

Monster Muddin'

I've been trying to pick up the pace with my prop building now that there's less than three months to Halloween! Despite plodding along all year I feel like I haven't accomplished much. We know that's not true, but I still need to get some more props built for my haunt.

To that end I've started working on a figure called "The Acolyte." Anyone who has visited Steve Hickman's awesome Terror Syndicate site should be immediately familiar with this figure. Although similar in most details, I decided to try my hand at making the head rather than using a mask. To do that, I thought I'd use a combination of techniques: the insulation mache clay used by Stolloween and the cloth mache technique popularized by Dan Reeder, the Monster Man.

I previously used Stolloween's paper clay on a test dragon I made (you've seen him in the corpse group photo) and I wasn't exactly enamored of it. However, I was thinking that was because I didn't make the clay properly and so wanted to give it another go. I figured my Acolyte head would be a good place to restart.

While I've been building my props, I've also been looking at Dan Reeder's website, Gourmet Paper Mache, and reading through his book "Papier-Mache Monsters." His technique for constructing the mache forms look so easy when he did it I thought it would also be a good time to implement that style too. Okay, admittedly I've got to practice a little bit more with this whole thing, but in the end I decided I really liked both. I'm willing to use these methods again and again. I think things will improve as I move forward.

What I like about Reeder's mache method is that it's not the time consuming strip mache style commonly used. He uses big sheets of paper, or only slightly smaller torn sheets. It saves bundles of time for a similar outcome.

Once I had my basic head shape, I switched to Stolloween's paper clay to add details such as a more prominent nose, brows, etc. Once that dried, I went back to Reeder and used his cloth mache. This adds a lot of character to the features but will be an area that I'll need to use a little more patience with. The resulting face looked a little too "busy." Although in the daylight the Acolyte's head doesn't look all that great, at night -- under an LED spotlight -- he'll look creepy enough!

Inspired as I was, I decided to use both techniques to build my next prop, the Pumpkin Reaper. There's a little bit of Grim Hollow Haunt's pumpkin creep (I forget what John Graham calls it) but I think mine will be different in several respects. Right now, though, all I've got is the beginnings of the pumpkin head -- papier mache underneath, paper clay on top to accentuate the ribbing. Tomorrow I'll be adding the cloth mache and that's where the differences will really become apparent (or so I hope!).

Today, though, was a day for Monster Mud. The Acolyte was coated in two coats and I'm enjoying the look of it (with all the caveats mentioned above taken into consideration). But there's a lot more to build, a lot more Monster Mud to play in, and more to paint. Onward!

Friday, October 9, 2009

The Weekend Starts


This weekend is the time to try and complete as many of the projects that I have going as I can. Not only am I finishing up another groundbreaker zombie for the graveyard but I've got a bunch of things to do for the party on the 30th.

That's my test run set up (at least before the wind knocked everything downthe other day), but there's still more to add.

Here's my full plate:

1. Groundbreakers - finish painting and seal
2. PVC candle centerpiece
3. Paint ping pong ball eyeballs for jar
4. Create witch's specimen jars (get specimens!)
5. Haunted pictures
6. Creepy dolls
7. Shrunken heads for fence
8. Lighting for graveyard and house
9. Pallet toe-pincher coffin
10. Prop arm for coffin
11. Fan-powered flames
12. Paint address on entrance columns -- can't decide if I live at "13" Garden St. or "666" Garden St.
13. Anything else that pops into my headfrom reading too many damn Halloween blogs

Final details will be put on my last groundbreaker tomorrow and Sunday I hope to seal them so I can put them out. Hope someone doesn't walk off with them.

I wired the PVC candles today and tomorrow will begin apply the "wax" to their sides. With any luck I'll start painting them on Sunday.

Then I can start everything else on that list. I'm hoping that next year it will be a lot less pressure since I intend to work on these things throughout the year instead of beginning one month beforehand. Yeah, that's it!
Related Posts with Thumbnails
 
/* Use this with templates/template-twocol.html */